Altium Designer Pick and Place Locations
D:\Offical\Hardware\devkits\Extension\Curiosity nano touch adapter\Hardware\Ver_3\Project Outputs for Curiosity nano touch adapter\Pick Place\Pick Place for Curiosity nano touch adapter.txt

========================================================================================================================
File Design Information:

Date:       25/11/19
Time:       14:53
Revision:   Not in VersionControl
Variant:    No variations
Units used: mm

Designator Comment                                         Layer       Footprint Center-X(mm) Center-Y(mm) Rotation Description                                                    
LABEL100   ""                                              BottomLayer AP8-00317 -252.0390    -108.3540    180      "PCBA identification label PP Top White Gloss"                 
J6         "Not suitable for pick-and-place (missing tab)" TopLayer    AP8-01174 -26.7410     6.4540       270      "1x28 receptacle pin socket, 2.54mm pitch THM, BULK packaging" 
J5         "Not suitable for pick-and-place (missing tab)" TopLayer    AP8-01174 -41.9810     6.4540       270      "1x28 receptacle pin socket, 2.54mm pitch THM, BULK packaging" 
J4         None                                            TopLayer    AP8-00176 -47.0610     -43.1522     90       "1x4 pin header, 2.54mm pitch, Pin-in-Paste THM"               
SW1        ""                                              TopLayer    AP8-00684 -8.6308      42.9216      180      "Slide Switch, C&K, 2 Pos 2 Pol, SMD"                          
J2         ""                                              TopLayer    AP8-01078 1.2700       -26.6700     270      "Pin header, 2x10, Right Angle, 2.54mm, THM, Pin In Paste"     
J1         ""                                              TopLayer    AP8-01078 1.2700       8.8900       270      "Pin header, 2x10, Right Angle, 2.54mm, THM, Pin In Paste"     
C4         "Generic part, no manufacturer specified."      TopLayer    AP1-00069 3.2258       31.9024      180      "Ceramic capacitor, SMD 0805, X7R, 16V, 10%,"                  
D2         "Farnell no. 1652078"                           TopLayer    AP4-00017 -0.1218      44.6810      180      "LED, Green, 570nm, SMD 0603"                                  
E1         "RUBBER FEET"                                   BottomLayer AP8-00192 -252.0390    -108.3540    180      "2.8mm adhesive feet,diam 8.0mm"                               
E2         "RUBBER FEET"                                   BottomLayer AP8-00192 -252.0390    -108.3540    180      "2.8mm adhesive feet,diam 8.0mm"                               
E3         "RUBBER FEET"                                   BottomLayer AP8-00192 -252.0390    -108.3540    180      "2.8mm adhesive feet,diam 8.0mm"                               
E4         "RUBBER FEET"                                   BottomLayer AP8-00192 -252.0390    -108.3540    180      "2.8mm adhesive feet,diam 8.0mm"                               
R1         ""                                              TopLayer    AP2-00000 -0.2838      46.3828      180      "Thick film resistor, SMD 0402, 1/16W, 1%"                     
R8         ""                                              TopLayer    AP2-00000 3.6068       33.6804      180      "Thick film resistor, SMD 0402, 1/16W, 1%"                     
R9         ""                                              BottomLayer AP2-00000 -44.3940     20.4240      360      "Thick film resistor, SMD 0402, 1/16W, 1%"                     
R10        ""                                              BottomLayer AP2-00000 -44.3940     17.8840      360      "Thick film resistor, SMD 0402, 1/16W, 1%"                     
R12        ""                                              TopLayer    AP2-00000 -14.4474     28.0948      360      "RES 0.0 OHM 1/16W 0402 SMD"                                   
R14        ""                                              TopLayer    AP2-00000 3.6068       27.0764      180      "RES 0.0 OHM 1/16W 0402 SMD"                                   
U2         ""                                              TopLayer    AP6-00409 2.8448       29.1084      0        "ATSHA204A with 1-wire interface and UDFN8 package"            
J3         "HEADER 1x2"                                    TopLayer    AP8-01074 -19.1210     45.6716      180      "1x2 pin header, 2.54mm pitch, Pin-in-Paste THM"               
